Mitsubishi Electric Freqrol-A100 Instruction Manual page 88

Pr. 14
-
Pr. 16
(2) Setting of acceleration/deceleration time
In Pr. 16 "jog acceleration/deceleration time", set accelera-
tionldeceleration time for jog operation.
Acceleration time is a period
of time required to reach the
oulput
accelerationlde'celeration
Frsqusncy(Hr)
reference frequency (Pr. 20)
from OHz. Deceleration time
is a period of time required
, , ,
erationldeceleration refer-
to reach OHz from the accel-
I I
ence frequency (Pr. 20). Set
I I I
Across JOG and
i!
'
:
ON
:
: " " r
,
a longer time to accelerate
SD
i ' :
or decelerate more slowly,
~ ; ~ $ : ~ "
I
ON
and a shorter time to accel-
; z z d y n A
erate or decelerate more
rapidly.
(Note 1, 2)
Factory Setting
(
Setting Range
0 to 3600 seconds1
0'5 seconds
10 to 360 seconds
I
Note: 1. In only S-pattern accelerationldeceleration A (see
page 77), the set time is a period of time required to
reach the base frequency (Pr. 3).
2. If Pr. 20 (accelerationldece~eration reference fre-
quency) setting is changed, the set values of calibra-
tion Pr. 903 and Pr. 905 (frequency setting signal gain)
remain unchanged. To adjust the gains, adjust calibra-
'
tion Pr. 903 and Pr. 905.
(3)
Setting of frequency
In Pr. 15 (jog frequency), set the running frequency for jog
operation.
s
.
Factory Settinq
1
Setting Ranqe
5Hz
0 to 120Hz