Mitsubishi Electric Freqrol-A100 Instruction Manual page 67

Displays the parameter menu and allows any of the following four items to be selected and executed:
1 Setting
..................
Switches to the parameter setting mode.
2 Pr. List
..................
Displays the parameter list in numerical order and allows the values
of individual parameters to be read and written.
............
3
Set Pr. List Displays a list of Pr. numbers and set values of only the parameters
that have been changed from the factory setting. (For the parameters
that have not been changed, their Pr. numbers are only displayed.)
4 Def. Pr. List
..........
Displays a list of the initial values (default factory setting) of parame-
ters.
Display of the parameter menu
......
1) Press the [HELP] key The help function menu is called.
twice in the operation
mode.
I
2) Using the [ V ] key, move the cursor (O) to "3 PARAMETER'.
3)
Press the [READ] key.
....
The parameter menu is dis-
played.
1
Press any of the [MONITOR], [SET],
[EXT OP] and [PU OP] keys to switch to
the corresponding mode.
Selection and execution of "1 Setting"
Operation procedure
1) Call the parameter menu in accordance with the above pro-
cedure.
1
2) Make sure that the
.......
If not, move the cursor with the
cursor
(0)
is located
[ A ] [ V ] key.
at "1 Setting".
3)
Press the [READ] key.
....
The inverter switches to the set
mode.
1
Press any of the [MONITOR], [EXT OP]
,
and [PU OP] keys to switch to the corre-
sponding mode.
Display
I
Display