Mitsubishi Electric Freqrol-A100 Instruction Manual page 64

3.2.3
Help
unction
Operation Procedure
Displays the monitoring list and allows the monitor screen to be changed and the first priority screen
to be set.
Operation procedure 1 (To call the monitoring list from the help function menu)
1) Press the [HELP] key
......
The help function menu is called.
twice in the monitor
mode.
2) Make sure that the
......
If not, move the cursor with the
cursor ( 3 ) is located
[ A ] [ V ] key.
at "1 MONITORu.
3) Press the [READ] key.
....
The monitoring list is called.
I
4) Press the [ A ] or [ V ] key to move the cursor ( 3 ) to the re-
quired item.
5 ) If the required item is not found, press the [SHIFT] key and
[ V ] key together to shift to the next page.
6) Press the [READ] key.
....
The monitor screen specified by
the cursor is displayed.
1
Press any of the [SET], [EXT OP] and [PU
OP] keys to switch to the corresponding
mode.
I l l
Display
I
.
After pressing the [READ] key,
press the [WRITE] key to set that
monitor screen as the first priority
1
screen.
Operation procedure 2 (To call the monitoring list directly in the monitoring mode)
Display
1) Press the [MONITOR]
.....
The inverter is put in the monitor-
key. (Note) ing mode.
I
2) Press the [HELP] key.
....
The monitoring list is called.
2
cumt
1)
2
1
3) ~ ; e s s the [ A ] or [ V ] key to move the cursor ( 3 ) to the re-
4)
quired item.
I
4)
If the required item is not found, press the [SHIFT] key and
[ V ] key together to shift to the next page.
screen.
1
Press any of the [SET], [EXT OP] and [PU
OP] keys to switch to the corresponding
pressed if the inverter is already in the
mode. monitoring mode.
b
J l
5) Press the [READ] key.
....
The monitor screen specified by
the cursor is displayed.
......
After pressing the [READ] key,
press the [WRITE] key to set that
monitor screen as the first priority