Removal And Reinstallation Of The Cover - Mitsubishi Electric FR-CC2-H315K Instruction Manual

2.2

Removal and reinstallation of the cover

 Removal of the accessory cover and installation of the operation panel
• Loosen the two fixing screws on the accessory cover.
(These screws cannot be removed.)
• To install the inverter operation panel, align its connector on the back with the PU connector of the converter unit, and insert
the operation panel. After confirming that the operation panel is fit securely, tighten the screws. (Tightening torque: 0.40
to 0.45 N·m)
 Removal of the front cover (lower side)
(a)
(a) When the mounting screws are removed, the front cover (lower side) can be removed.
(b) With the front cover (lower side) removed, wiring of the main circuit terminals can be performed.
• Press the upper edge of the operation panel while pulling
out the operation panel.
(b)
2.2 Removal and reinstallation of the cover
2. INSTALLATION AND WIRING
1
2
3
4
5
6
7
8
9
10
23