Installation And Wiring; Operation Environmental Conditions - Mitsubishi Electric Freqrol-A100 Instruction Manual

1.3 INSTALLATION AND WIRING
r
Incorrect installation or connection might cause the inverter to operate improp-
erly, and in some cases, its life to be reduced considerably. In the worst case,
the inverter will be damaged. Please handle the inverter properly in accord-
ance with the information, precautions and instructions contained in
manual.
L
1.3.1 Operation Environmental Conditions
Handle the unit carefully.
The inverter is made of plastic parts. Handle the inverter
gently to protect it from damage. Also, hold the unit care-
fully so that force is not applied to its front cover only.
Install the inverter where i t i s not subjected to vibra-
tion.
Note o n ambient temperature.
Ambient temperature in the place of installation must not
exceed the permissible value (50°C) because it greatly
influences the life of the inverter. Check that the ambient
temperature is within the permissible range in the positions
shown below.
4
" u r e m e n t position
5 cm
FREQROL
5
cm
u
cm
L M e a s u r e m e n t position
Install the inverter o n a non-combustible surface.
Install the inverter on a non-combustible surface (e.g. met-
al).
Also take the vibration of a carrier, press, etc. into consid-
eration.