Mitsubishi Electric Freqrol-A100 Instruction Manual page 215

'R-HC
1 .
The power return function supplied as standard provides a large braking capability. (100% continuous return possible:
Option (Type)
ligh power factor
onverter
More than one inverter can be connected to one high power factor converter.
.
The hlgh power factor converter is used with the external box and reactors 1, 2 which are supplied as standard
accessories.
Specifications, Structure, Etc.
As this converter improves the input power factor to approx. 1 (at the load factor of
loo%),
the power supply capacity
can be reduced to about 213.
1 .
Specifications
Note: .When the inverter connected has a capacity less than the applicable range, the high power factor converter
may be used as a common or regenerative converter but its power harmonic suppression effect will
decrease.
Connect at least one inverter which has a capacity higher than half that of the high power factor converter.
If the sum of connected inverter capacities is lower than half that of the hiah power factor converter, the high
power factor converter may be used as a common or regenerative converter but its power harmonic
suppression effect will decrease.
Outline dimensions
[Unit: mml
Htgh power factor converter
Reactor 1 ,
2
External box