Configuration Concepts; Configuration Tools - AudioCodes Mediant 600 User Manual

SIP User's Manual
2

Configuration Concepts

This section discusses the device's configuration tools.
2.1

Configuration Tools

You can configure the device, using the following management tools:

The device's HTTP-based Embedded Web Server (Web interface), using any
standard Web browser (described in ''Web-based Management'' on page 27).

A configuration ini file loaded to the device (see ''ini File Configuration'' on page 219).

AudioCodes' Element Management System (see ''Element Management System
(EMS)'' on page 225).

Simple Network Management Protocol (SNMP) browser software (refer to the Product
Reference Manual).
Note:
Version 6.2
To initialize the device by assigning it an IP address, a firmware file (cmp),
and a configuration file (ini file), you can use AudioCodes' BootP/TFTP utility,
which accesses the device using the device's MAC address (refer to the
Product Reference Manual).
25
2. Configuration Concepts
February 2011