Configuring the Cisco
Step one: Log in to the Cisco TS MSE 8710
All administration of the Cisco TS MSE 8710 is performed via the web interface.
To log in to the web interface of the Cisco TS MSE 8710.
1
Log in to the Supervisor's web interface.
2
Go to
Hardware > Blades
3
Enter the user name
Cisco recommends that you change the admin account to use a password
i
as soon as possible. To do that, click
information
required user information.
Step two: Configuring settings, conferences, endpoints and
rooms
Use the online help to configure your Cisco TS MSE 8710. You may need to
configure the network and the systems settings, then go on to add conferences,
endpoints and rooms. The online help also tells you how to provide instructions for
users who will log in from a room and start conferences.
TS MSE 8710
and click the IP address of the Cisco TS MSE 8710.
with no password.
admin
page or go to
Users
Configuring the Cisco TS MSE 8710
Change password
, click the
admin
on the
Login
link, and provide the
9