Attach The Motorized Excitation Filter Wheel (Optional) - Nikon Eclipse Ni-E Instruction Manual

13

Attach the motorized excitation filter wheel (optional).

Tool: Hex wrench (3 mm across flats)
(1) Connect the opening of the excitation filter wheel to
the bayonet mount of the epi-fluorescence
attachment.
(2) Press the excitation filter wheel supporting fixture
against the rear of the epi-fluorescence attachment
(location (2)) while pressing it against the bottom
(location (1)) of the excitation filter wheel.
(3) Tighten the support fixture with fixing screws 1 (x2)
and fixing screw 2 (x1) in this order.
Precaution for tightening fixing screw 1
Tighten the fixing screw 1 while pressing the support
fixture firmly so that there is no gap at location (1). If
there is a gap, the excitation filter wheel will be
attached at an angle when fixing screw 2 is tightened.
(4) Connect the cable for the motorized excitation filter
wheel to the EX connector for the connector box.
Chapter 1
Assembly
Attaching the motorized excitation filter wheel
Epi-fluorescence
attachment
Contact
arm
17
P
A. STO
F. ST OP
Motorized excitation
filter wheel
Fixing screw 2
supporting fixture
Fixing
screw 1
(2)
Motorized excitation
filter wheel
supporting fixture
Fixing the supporting fixture
Fixing
screw 1
Motorized
excitation
filter wheel
(1)
Fixing screw 2