Nikon Eclipse Ni-E Instruction Manual page 34

(1) Remove the cover.
For NI-CUD-E, open the module replacement cover.
For NI-CUD, remove two screws securing the module replacement cover using the provided hex driver and
remove the cover.
(2) Attach the optical module.
A number is shown near the mounting hole. Attach the optical module in the specified hole. Turn the turret to
bring the desired hole to an accessible position for attaching the optical module. Place the module with its
name facing up.
Module positioning hole number
Hole
Module
number
Empty: For bright-field microscopy
1
(module not attachable)
PH module [D-C PH-1]
2 or 3
PH module [D-C PH-2]
4 PH module [D-C PH-3]
DIC module
[D-C DIC N2 DRY]
DIC module
[D-C DIC NR DRY]
5 or 6
Dark field module [D-C DF]
2-4x auxiliary lens
[D-C 2-4x] (φ39)
DIC module
[D-C DIC N1 DRY]
7
2-4x auxiliary lens
[NI-CALN1] (φ35)
Chapter 1
Universal Condenser Structure (example: NI-CUD-E)
Module
replacement
cover
Condenser lens
Tightening
screw
Example of
attaching the
PH module
[D-C PH3]
Example of
attaching the DIC
module [D-C DIC
N2 DRY]
26
Assembly
U-CON connector
Condenser
focus knob
Condenser focusing unit
PH module centering knob
Pull the knob up horizontally when using the
centering screw. Otherwise keep it folded down.
PH module
PH module centering
screws
Turret
Module fixing screw
Positioning groove
Nameplate sticker
(provided with NI-CUD)
Put nameplate
sticker [N2].
Hole number (1)
through (7)
Positioning pin
Put nameplate
sticker [Ph3].
DIC module on
the condenser