Queuing Feature - Panasonic KX-NS1000 Manual

2.2.2.4 Queuing Feature

Description
When a preprogrammed number of extensions in an incoming call distribution group are busy, additional
incoming calls can wait in a queue. The number of calls which can wait in the queue is programmable.
While calls are waiting in the queue, the calls are handled by the Queuing Time Table, which can be assigned
for each time mode (day/lunch/break/night) (® 5.1.4 Time Service). This PBX supports a specified number
of Queuing Time Tables which each have a specified number of sequences (specific commands which are
performed when a caller enters a queue). The following commands can be assigned to each sequence when
making a Queuing Time Table:
[Command Table]
Command
OGM xx
Wait xx s
Sequence xx
Overflow
Disconnect
Queue No.
Queue No. and Time
None
(No command)
[Programming Example of Queuing Time Table]
Queuing Time Table No.
01
02
*2
03
:
® 11.5.2 PBX Configuration—[3-5-2] Group—Incoming Call Distribution Group—Queuing Time Table—
*1
Sequence—Sequence 01–16
If a call has not reached a destination by the time the final sequence is completed, the call will be disconnected.
*2
Description
An outgoing message is sent to the
caller. "xx" applies to the OGM
number.
Puts the caller in the waiting queue for
b (01-16) ´ 5 seconds.
"xx" applies to the number of seconds
to wait (05-80).
Redirects to sequence xx. "xx"
applies to the sequence number.
Redirects to the overflow destination.
Disconnects the line.
Announces the number of calls in the
waiting queue ahead of the caller.
Announces the number of calls in the
waiting queue ahead of the caller and
the estimated waiting time.
Redirects to the next sequence.
Sequence 01 Sequence 02
OGM 01
OGM 02
:
2.2.2 Incoming Call Distribution Group Features
After the OGM, Music on Hold will be sent
and the next event in the sequence will
be activated.
If an OGM has not been sent to the caller,
the caller hears a ringback tone.
If an OGM has been sent to the caller, the
caller hears Music on Hold.
None
None
None
Activation key required:
Call Centre Feature Enhancement
(KX-NSF201)
Activation key required:
Call Centre Feature Enhancement
(KX-NSF201)
If assigned as sequence 01, the Queuing
Time Table will not be activated.
Sequence
Sequence 03
Wait 30 s OGM 03
Wait 30 s OGM 04
:
Condition
*1
Sequence 04
Overflow
None
: :
Queuing
Feature Guide
...
:
59