Panasonic KX-NS1000 Manual page 105

TRS/Barring checks only the dialled telephone number excluding the Host PBX Access code when
accessing the telephone company through the host PBX. (® 2.7.1 Toll Restriction (TRS)/Call Barring
(Barring))
•
ARS
A pause is not automatically inserted between the user-dialled access code and the subsequent digits
when the ARS mode is enabled. (2.8.1 Automatic Route Selection (ARS))
•
SMDR
The dialled number including the Host PBX Access code will be recorded on SMDR only if the modified
number setting is selected in the ARS setting for SMDR.
•
When a Host PBX Access code is assigned to a trunk group, calls to extensions of the host PBX are not
recorded on SMDR.
•
A Host PBX Access Code can be used to record only long distance calls on SMDR when a trunk port is
connected directly to the telephone company (not a host PBX). This is allowed when the long distance
code (e.g., "0") is assigned as the Host PBX Access code. All local calls (e.g., calls that do not require a
"0" to be dialled first) are treated as extensions of the telephone company and do not get recorded on
SMDR, because in this case this PBX recognises the telephone company as the host PBX.
Therefore, only long distance calls are recorded on SMDR.
PC Programming Manual References
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings—Host PBX Access Code
19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR Options—
Feature Guide References
2.22.1.1 Station Message Detail Recording (SMDR)
6.1 Capacity of System Resources
2.5.4 Trunk Call Features
Option—ARS Dial
Feature Guide 105