One-Look Networking; One-Look Networking Overview - Panasonic KX-NS1000 Manual

4.2.1 One-look Networking Overview

4.2 One-look Networking

4.2.1 One-look Networking Overview
Description
A One-look network is a network of KX-NS1000 PBXs connected and managed over a private IP network. One
PBX serves as the Master unit, which controls one or more PBXs, known as Slave units. Almost all
programming and configuration can be done through the Master unit.
Although PBXs and extensions may be located in physically different locations, conceptually the system
behaves as one PBX.
Each PBX in a One-look network and the devices under it are referred to as a "site", regardless of whether the
PBX is a Master unit or Slave unit. The PBX at each site is often referred to as the local PBX.
Physical Connection
Site 1
Master Unit
PBX
Private IP Network
Site 3
PBX
Slave Unit
Features of One-look networking
•
Simple setup and expansion
When setting up a PBX initially, the first step is to specify whether it is a Master unit or a Slave unit. If a
PBX is specified as a Slave unit, it automatically locates the Master unit if they are on the same LAN.
® 2.1.4 Easy Setup Wizard
After the initial settings have been configured, the only additional step is to register the Slave unit to the
Master unit using a simple wizard. Note that a Slave unit will not function until it is registered.
356 Feature Guide
Site 2
Slave Unit
PBX
Conceptual View
PBX
(Site 1) (Site 2) (Site 3)