Panasonic KX-NS1000 Manual page 27

Location
0001 123-4567
0002 123-2468
0003 123-456
:
® 18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—
*1
® 18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—
*2
® 18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—
*3
® 18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—
*4
Note
The following settings can also be specified in the DID/DDI table:
•
Tenant number: determines the time mode (day/lunch/break/night) for the corresponding trunk.
•
UM service group number: determines the service group to use when a call is handled by the Unified
Messaging system.
•
VM trunk group number: used in Voice Mail DPT (Digital) Integration with a VPS.
Explanation:
If the DID/DDI number is "123-4567":
1.
Checks the number in the table.
® Matches the number in location 0001.
2.
Checks the time mode.
In Day mode: CLI is enabled. Route to CLI destination.
In Lunch mode: CLI is disabled. Route to DID/DDI destination, extension 100.
Conditions
•
To use this feature, DID/DDI service must be assigned as the distribution method for a trunk port.
•
DID/DDI Number Modification
It is possible to modify a received DID/DDI number, which may be convenient when programming the DID/
DDI table. The modification method (removed number of digits/added number) can be programmed on a
trunk port basis.
[Modification Example]
Removed number of digits: 6
Added number: 10
Received DID/DDI number: 87654321
•
Inter-digit Time
When the Inter-digit time expires, the PBX stops receiving the DID/DDI number and starts to check the
DID/DDI table. (Refer to the [Programming Example of DID/DDI Table] above).
No. Name
*1 *2
John
White
Tom
Smith
A
company
: :
CLI
*3
Day Lunch
Enable Disable
Enable Disable
Enable Disable
: :
Modified DID/DDI number: 876543 21 = 1021
1) Remove the
first 6 digits.
2.1.1 Incoming Trunk Call Features
Destination
... Day
... 105
... 102
... 101
: :
DDI / DID Number
DDI / DID Name
CLI Ring for DDI/DID—Day, Lunch, Break, Night
DDI / DID Destination—Day, Lunch, Break, Night
2) Add "10".
*4
Lunch ...
100 ...
100 ...
101 ...
: :
Feature Guide 27