Panasonic KX-NS1000 Manual page 239

Number in
the Pattern
(9) CD (Condition
Code)
(10) Cost
[Programmable Items]
Item
Outgoing trunk call
Incoming trunk call
Outgoing intercom call
Log-in/Log-out status
ARS dial
Item
Shows other call information with the following codes:
CL: Collect call
TR: Transfer
FW: FWD to trunk
D0: Call using DISA or TIE line service
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual Caller ID)
VA: Answered call with Call Waiting Caller ID (Visual Caller ID)
Shows the call charge.
Controls whether the outgoing trunk calls are shown. This setting
is common throughout the PBX. COS programming is also
required.
® 19.1 PBX Configuration—[11-1]
Maintenance—Main—SMDR—
Call
Controls whether the incoming trunk calls are shown.
® 19.1 PBX Configuration—[11-1]
Maintenance—Main—SMDR—
Call
Controls whether the outgoing intercom calls are recorded.
® 19.1 PBX Configuration—[11-1]
Maintenance—Main—SMDR—
Call
Controls whether the log-in/log-out status is recorded.
® 19.1 PBX Configuration—[11-1]
Maintenance—Main—SMDR—
Log-out
Controls whether the user-dialled number or the modified number
is shown.
The Host PBX Access code ("=" followed by the access code) can
be shown (as supplementary information) only when the modified
number is selected in this setting. (® 2.8.1 Automatic Route
Selection (ARS))
® 19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR
Options—
Description
Description
Print Information—Outgoing
Print Information—Incoming
Print Information—Intercom
Print Information—Log-in /
Option—ARS Dial
2.22.1 Record Log Features
Feature Guide 239