Intercom Call - Panasonic KX-NS1000 Manual

2.5.3 Intercom Call

Description
An extension user can call another extension user.
Conditions
•
Extension Number/Name Assignment
Extension numbers and names are assigned to all extensions. The assigned number and name are shown
on display PTs during intercom calls.
•
DSS Button
It is possible to access another extension with one touch by pressing the corresponding Direct Station
Selection (DSS) button. A flexible button can be customised as a DSS button.
•
Call Directory—Extension Dialling
A display PT user can make a call by selecting one of the stored names on the display.
•
Limiting the display by tenant—Call Directory
For Call Directory, an extension can reference the data for all tenants or for each tenant the extension is
member of, depending on system programming. In "Each Tenant" mode, Call Directory is displayed on
display PTs as follows:
Only information about extensions that belong to the tenant is displayed.
•
Alternate Receiving—Ring/Voice
A PT user can select to receive intercom calls by ring tone or by voice, through personal programming
(Alternate Receiving—Ring/Voice). If a user selects voice-calling, the calling party talks to the user
immediately after a confirmation tone. Denying voice-calling can also be selected.
•
Alternate Calling—Ring/Voice
A caller can change the called party's preset call receiving method (ring tone or voice) temporarily. By
doing so, ring-calling is switched to voice-calling, or vice versa, at the called party. The called party may
deny voice-calling.
•
PDN/SDN
It is not possible to temporarily change the called party's preset call receiving method when making a call
using a Primary Directory Number (PDN) button or Secondary Directory Number (SDN) button (®
2.9.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension).
•
Tone after Dialling
After dialling an extension number, a user will hear one of the following:
Ringback Tone
Confirmation Tone
Busy Tone
DND Tone
PC Programming Manual References
10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan—B/NA DND Call Feature—
- Ring / Voice
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
→Main— Extension Number
→Main— Extension Name
→Option 3—
Type
Indicates the called party is being called.
Indicates the called party has set voice-calling.
Indicates the called party is busy.
Indicates the called party has set DND.
Intercom Call by Voice
Description
2.5.3 Intercom Call
Alternate Calling
Feature Guide 95