Um Group Failover - Panasonic KX-NS1000 Manual

Hide thumbs Also See for KX-NS1000:

Table of Contents

4.2.3.3 UM Group Failover

Each UM group can be assigned a failover destination. If a call is routed to a UM group that is unavailable, the

call will be redirected to the specified UM group.

Incoming Call

Failover Group: 3

UM group failover applies to incoming trunk calls (including DISA), intercom calls, and faxes.

If a call cannot be routed to a UM group and no failover UM group is specified, the system handles the call

according to Intercept Routing—No Destination (® 2.1.1.7 Intercept Routing—No Destination).

Failover redirection does not cascade; if the failover destination is unavailable, the call will not be redirected

to that UM group's failover destination.

The same UM group may be specified as the failover destination for multiple UM groups. For example, UM

group 3 can be the failover destination for both UM group 1 and UM group 2.

PC Programming Manual References

11.7.2 PBX Configuration—[3-7-2] Group—UM Group—Unit Settings—

4.2.3 One-look Networking Survivability

Fail Over Site Name

Feature Guide