Panasonic KX-NS1000 Manual page 277

•
When the manager tries to record a message, he will hear ringback tone if a message channel is in use.
When all message ports become idle, he will hear the progress tone for a preprogrammed time period.
After that, the PBX will automatically proceed into the recording mode.
•
Copying messages to and from a PC
Via Web Maintenance Console, messages can be copied to and from a PC. This feature is useful for
copying the same message to multiple sites.
–
Messages are downloaded to a PC in WAV (G.711a/µ) format.
–
Messages uploaded from a PC must be in one of the following formats: WAV (linear PCM) or WAV
(G.711a/µ).
Installation Manual References
4.3.3 DSP S Card (KX-NS0110), DSP M Card (KX-NS0111), DSP L Card (KX-NS0112)
PC Programming Manual References
2.1.4 Easy Setup Wizard—PBX Setting—Select the default value of Numbering Plan
7.2.5 Utility—File—Message File Transfer PC to PBX
7.2.6 Utility—File—Message File Transfer PBX to PC
10.3 PBX Configuration—[2-3] System—Timers & Counters—DISA / Door / Reminder / U. Conf—
DISA—Progress Tone Continuation Time before Recording Message
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
Playback
11.5.2 PBX Configuration—[3-5-2] Group—Incoming Call Distribution Group—Queuing Time Table—
Queuing Sequence—Sequence 01–16
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message—
Number
Feature Guide References
5.5.8 Floating Extension
6.1 Capacity of System Resources
User Manual References
2.1.5 Recording Outgoing Messages (OGM)
2.28.2 Outgoing Message (OGM)
OGM Record / Clear /
Floating Extension
Feature Guide 277