Vanguard OHV V-Twin User Manual page 107

…
„
ˆ
Fig. 118
7. Remove cover plate (10). Discard gasket (11),
Fig. 119.
Fig. 119
8. Remove screws and choke plate (12), Fig. 120.
9. Remove choke shaft. Discard seal (13).
Fig. 120
10. Remove nozzle body (14), Fig. 121. Discard
gasket (15).
106
†
‡
11. Mark throttle plates (16), Fig. 122, before
removal so they will be re-installed in the original
position. Sides of throttle plate are beveled.
Š
12. Remove screws, throttle plates and throttle shaft
with seal. Discard seal (17).
This
procedure.
Clean Carburetor
1. Disassemble carburetor.
2. Remove and discard all old gaskets, seals and
sealing material.
• Wear suitable protection when using cleaners.
Follow instructions on container.
3. Use a commercial carburetor cleaner (such as
Briggs & Stratton Spray Cleaner, #100041 or
100042) to clean carburetor parts and body.
Fig. 121
Fig. 122
completes the carburetor
CAUTION
AVOID INJURY!
disassembly