Table of Contents
Advertisement
Making calls
Making an external call
External calls are calls using the public tel-
ephone network.
Enter the number and press
~ c
the talk key.
Or:
Press and hold the talk key
c ~
c and then enter the
number.
You can cancel the dialling operation with
the end call key a.
You are shown the duration of the call
while the call is in progress.
Please note:
Dialling using the directory, the call-by-call list
(page 1, page 21) or the calls and last number
redial list (page 26/page 25) saves you from
having to re-enter numbers and network pro-
vider prefixes ("call-by-call numbers").
Continuing a call on a Bluetooth headset
Precondition: Bluetooth is activated; a
connection has been established between
the Bluetooth headset and the handset
(see page 55).
Press the talk key on the Bluetooth head-
set; it may take up to 5 seconds to estab-
lish a connection to the handset.
For further details on your headset, see
the user guide issued with it.
Ending a call
Press the end call key.
a
Accepting a call
The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing handsfree key
d.
You can accept the call by:
¤
Pressing the talk key c.
¤
Pressing the handsfree key d.
¤
Gigaset S680: Press the display key
§Accept§
.
¤
Gigaset S685: Press the display key
Ÿ to divert the call to the answer
machine (page 39).
If the handset is in the charging cradle and
the
Auto Answer
function is activated
(page 49), the handset will take a call
automatically when you lift it out of the
cradle.
If the ringer melody is intrusive, press the
§Silence§
display key
. You can take the call as
long as it is displayed on the screen.
Accepting a call on a Bluetooth headset
Precondition: Bluetooth is activated; a
connection has been established between
the Bluetooth headset and the handset
(see page 55).
Only press the talk key on the headset
when the headset itself rings (this may
take up to 5 seconds).
For further details on your headset, see
the user guide issued with it.
Calling Line Identification
When you receive a call, the caller's
number is displayed on the screen if the
following conditions are met:
u
Your network provider supports CLIP,
CLI.
– CLI (Calling Line Identification): the
caller's number is transmitted.
– CLIP (Calling Line Identification Pres-
entation): the caller's number is dis-
played.
u
You have arranged CLIP with your net-
work provider.
u
The caller has arranged CLI with the
network provider.
Making calls
17
Hide quick links:
Advertisement
Table of Contents
