Putting internal subscribers on hold
Step
by
You are conducting an internal call.
Step
Press [CONSULT]: The internal subscriber is put on hold.
1.
You can set up an external enquiry call.
2.
To end the external call, press
by [OK]. You are then returned to the internal call and the external connection
is closed.
or
Three-way calling: press [CONF .]. This establishes the conference circuit.
2.
Parking/continuing calls ("unpark")
You are conducting an external call which you would like to transfer to another
telephone at your ISDN connection, for example.
Press
1.
Select using [
2.
Enter a parking number (one or two digits) and confirm with [OK].
3.
Press
4.
Unparking a call before answering
Press
1.
2.
Select using [
Cancel CallPark
Enter the parking number assigned previously and confirm with [OK].
3.
"Cancel CallPark" after answering a call
Press
1.
2.
Press
Select using [
3.
Enter the parking number assigned previously and confirm with [OK].
4.
Calling line identification restriction (CLIR)
If you withhold your number from other parties, you can activate the calling line
identification restriction. You can set up CLIR for just the next call or
permanently. If set up permanently your call number will be suppressed both
for outgoing calls (CLIR) and for incoming calls (COLR). This feature must be
supported by your provider.
Temporary calling line identification restriction
Press
1.
Select using [
2.
Withhold No.
Confirm with [OK]:
3.
$IWHUWKH.DOOWKLVUHVWUL.WLRQLVOLIWHG<RXUQXPEHUZLOOQRWEHZLWKKHOGIURPWKH
Info
QH[WSDUW\.DOOHG7KLVDSSOLHVHYHQLI\RXVHOH.WDQXPEHUIURPWKHUHGLDOOLVW
Permanent calling line identification restriction
Press
1.
or *for the menu.
] and [OK]:
Call Park
.
or *for selection menus.
Service Set up or Base Set up
] and [OK]:
.
D
.
or *for the menu.
] and [OK]:
Cancel CallPark
or *for selection menus.
Service Set up or Base Set up
] and [OK]:
'
(
in front of Withhold No. = ON / no = OFF).
or *for selection menus.
or *for the menu and select [End] followed
.
.
o
o
Call preparat.
o
o
Call preparat.
39