Download Print this page

Isdn Features; Transferring Calls - Ect; Call Waiting - Activating/Deactivating Cw; Busy Signal When Msn Is Engaged (Busy On Busy) - Siemens 4075 Operating Instructions Manual

Hide thumbs

Advertisement

ISDN features

Step
by
Step
Transferring calls – ECT
This function is only required for ECT (Explicit Call Transfer) behind PABXs.
Press
1.
Select using [
2.
settings

Call waiting - activating/deactivating CW

This feature can be set up separately for each subscriber. When call waiting is
activated, the caller hears the on-hook signal if you are already conducting a
call.
If call waiting is deactivated, the caller hears the ring tone if you are
already conducting a call and additional devices are assigned to this MSN.
If call waiting is deactivated, the caller hears the busy signal if you are already
conducting a call, and are either the only user assigned this MSN, or if the
feature Busy signal when MSN is engaged (Busy on Busy) see page 25 has
been activated.
Press
1.
Select using [
2.
o
user

Busy signal when MSN is engaged (Busy on Busy)

With this setting, the caller immediately hears the busy tone when a subscriber
in the same MSN group is conducting a call.
Subscriber
Press
1.
Select using [
2.
settings
Select using [
3.
The selection is confirmed with Š.
or *for selection menus.

Service Set up or Base Set up

] and [OK]:
o
Transition (ECT)
.
or *for selection menus.

] and [OK]:
Service Set up or Base Set up

o (required internal subscriber) o [
Set up device
Incoming MSN
A
11111
B
11111
or *for selection menus.


] and [OK]:
Service Set up or Base Set up
o
Busy on Busy
.

] and [OK].
o
o
9
Subscriber
is conducting a call is conducting a call
is called
hears busy tone
o
o
Settings
ISDN
o
Settings
Set up
] o
Call waiting
.
Caller
o
Settings
ISDN
25

Advertisement

loading