Call Transfer; Transfer On Ring - Siemens OpenStage 15 Administration Manual

3.5.4

Call Transfer

3.5.4.1

Transfer on Ring

If this function is active, a call can be transferred after the user has dialled the third participant's
number, but before the third party has answered the call. This feature is enabled or disabled in
the User menu. The default is "Yes".
Administration via WBM
(User) Configuration > Outgoing calls
Administration via Local Phone
|
--- User
|
--- Configuration
|
--- Outgoing calls
|
--- Transfer on ring
3.5.4.2 Transfer on Hangup
This feature applies to the following scenario: While A is talking to B, C calls A. A accepts the
call, so B is on hold and the call between A and C is active. If Transfer on hangup is enabled,
and A goes on-hook, B gets connected to C. If disabled, C will be released when A hangs up,
and A has the possibility to reconnect to B. By default, the feature is disabled.
A31003-S2000-M102-2-76A9, 28/05/2009
OpenScape Voice - OpenStage Family, Administration Manual
administration.fm
Administration
Features - Configuration
3-57