Setting The Camera Outputs; Selecting Video Output Signals For The Connectors; Setting The Monitor Picture - Sony SRW-9000 Operation Manual

Setting the Camera
Outputs
Selecting Video Output Signals
for the Connectors
You can select the types of video signals to be
output to the HD SDI MON1, HD SDI MON2,
TEST OUT, and REMOTE connectors.
Use the <MONITOR OUTPUT> page of the
Camera >USER (OPERATION) menu.
<MONITOR OUTPUT> page
COLOR
When you select COLOR, all R, G, and B
channels will be output.
Single-channel output of R, G, or B is also
possible.
MON
You can select the signals to be monitored with
video monitors connected to the HD SDI MON1
and HD SDI MON2 connectors.
Setting Signal
MON Regardless of the VF settings,
characters or markers can be
added independently to the
video output signals (default).
VF Video signals that are output
to the VF connector (camera
images with character data for
the setting menus, status
displays and so on).
TEST
You can select the signals to be output to a video
monitor or waveform monitor connected via the
TEST OUT connector.
Setting Signal
VBS VBS signals (default)
HD-Y HD-Y signals
FRAME One pulse per frame
Example 1: SHUTTER OFF
1 frame
CCD
Exposure
exposure
Frame
pulse
Example 2: SHUTTER ON, shutter angle 180º
1 frame
CCD
Exposure
exposure
Frame
pulse
RM VIDEO
You can select the video signals to be output to
equipment connected via the REMOTE
connector.
Setting Signal
VBS The VBS signals are output. (Default)
HD-Y The HD-Y signals are output.

Setting the Monitor Picture

Using the <PB/MON LUT> page of the Camera
>USER (OPERATION) menu, you can select the
gamma setting of the monitor picture and the
playback picture monitor mode.

Setting the Camera Outputs

Exposure
Exposure
53