Call Pickup; Call Pickup Groups; Call Transfer With Camp-On; Call Transfer Immediate - Toshiba Strata DK14 General Description Manual

Park and Page
This feature enables a user to park a call (in a General or Personal Park Orbit), enter a Page Zone
or Group access code, and then announce the orbit number of the waiting call to the Paged party. A
pre-programmed flexible button can be assigned to telephones to automatically connect to a
predesignated External Paging circuit, a Telephone Paging group or both.
Auto Park
This feature is only available to LCD telephones. When a telephone user parks a call, the user can
enter instead of a specific Orbit Number. The system will then automatically select the next
available General Park Orbit and park the call. The parking telephone's LCD will show the Park
Orbit that has been automatically selected for the parked call.

Call Pickup

By pressing a button or by going off-hook and dialing an access code, any station can pick up the
following type of calls:
[PDN] or [PhDN] calls on hold or ringing at other stations
CO/DID/Tie lines calls ringing at other stations, either all lines or designated lines. (See
"Tenant Service"
External or Station Group Page
CO line ringing during the Night mode over External Page or night bell
Door phone calls
Incoming CO line calls
Parked calls
Any ringing line or designated Tenant Group lines
Tandem CO line connections (by tandem origination telephone)

Call Pickup Groups

Up to 20 Call Pickup groups can be created to enable station users to pickup calls ringing at other
stations with the touch of a Pickup feature button or by dialing brief access codes.
Station users can pick up a call that is ringing or transferred to any station in their own group with
a single access code or feature button, and can pickup calls ringing stations in other groups with
selected codes. Any station can be in all the different pickup groups.

Call Transfer with Camp-on

A station user can transfer a CO, DID, or Tie line or internal call to a busy station, which will
receive an alert tone indicating that a call is camped-on. If the busy station fails to answer, the
camped-on call will recall the transferring station.
A camp-on tone is also sent to electronic or digital telephones that are busy and that do not have an
/LQH
idle [DN] or
by silence. It can be enabled or disabled for each individual station.

Call Transfer Immediate

For Digital LCD telephones: If the Feature Prompting Soft Key is used to transfer a call, the call
immediately transfers after the last digit of the destination is dialed. If the called station is not
available or is busy, the call automatically camps-on to it. This feature is helpful to people who
process a large number of calls with no time to wait for transferred calls to be answered.
Strata DK General Description
on Page 84.)
button to receive the call. Camp-on tone consists of two tone bursts, followed
5/99
Features
Station Features
93