Modular Headset - Toshiba Strata DK14 General Description Manual

Modular Headset

Digital telephones may be optionally equipped with a modular headset jack by installing an HHEU
PCB.
Off-hook Call Announce (OCA)
OCA allows a station user to send a voice announcement to a busy digital or electronic telephone.
The call must be directed to a station's [PDN] or [PhDN]. OCA will not occur when the called
station is not the owner of the dialed [PDN] or [PhDN]. Only the [PhDN] owner telephone can
receive OCA on calls to the [PhDN].
In order for a station to receive OCA, the station must be assigned with OCA-receive capability in
the system database. Depending on system programming and hardware availability, the called
station can receive OCA in one of the following ways:
Handset Mode
An OCA announcement can be sent through the handset receiver to called party who is off-hook
and engaged in a conversation. Only digital telephone sets can have this feature. If the called
party's station has been programmed with Handset Mode and OCA-receiving capability, an OCA
warning tone (optional) and announcement can be sent to through the handset. The Cordless DKT-
2004-CT will also receive the warning tone and announcement.
The called station user, while off-hook and engaged in a conversation, will hear the outside talking
party and the OCA calling party, but the outside talking party cannot hear the OCA calling party.
The called station user can hold down the
through the handset; the outside talking party will not hear the response.
A digital telephone feature button can be programmed to work with "push-on/off" action. When
"push-on/off" is used, the outside party will hear MOH, if installed, when the called party talks
back to the OCA party; otherwise, the outside party hears nothing when excluded from the talk
path. Receiving handset OCA calls is available to digital telephones only; no special hardware
additions are required.
The DKT2001 telephone can receive handset OCA annoucements, but the user cannot respond,
since the DKT2001 does not have
Speaker Mode
An OCA announcement can be sent through the speaker to a called party who is off-hook and
engaged in a conversation. The called phone user must be equipped with a digital telephone with
the optional DVSU PCB and the station must be programmed for OCA-receiving capability. The
Cordless DKT-2004-CT telephone is not compatible with Speaker OCA.
The called station user can respond to the OCA caller by talking into the telephone's microphone.
With more than one party connected, two-way simultaneous conversations are possible. However,
the RPCI PC/Data Interface cannot be used if speaker mode OCA is installed or vice versa.
Electronic telephones are compatible with speaker OCA (optional hardware is required).
On-hook Dialing
Digital and electronic telephone users can dial calls without lifting the handset, freeing their hands
for other tasks. System dial tone, dial pulsing, ringing, and the voice of the answering party are all
heard over the telephone speaker. The handset does not need to be lifted until after the party
answers, and on speakerphone models does not need to be lifted at all.
Strata DK General Description
0LF
0LF
button.
5/99
button to respond and talk to the OCA calling party
Features
Station Features
97