Peripherals - Toshiba Strata DK14 General Description Manual

Strata DK40i

Peripherals

Table 4 KSU and Expansion Unit Specifications
Key Service Base Unit
Expansion Unit
Peripherals
The DK40i Base KSU can support a number of peripherals, which are not considered as stations or
lines and do not affect the maximum station and line capacities. The DK40i Base KSU comes
standard with built-in interfaces for connecting the following dealer-supplied equipment: an
amplifier and speaker for paging and night ringing, Music-on-Hold (MOH) source, reserve power
batteries, and emergency standard telephone for system power failure occurrences when using
loop start lines in the base cabinet.
A relay contact is also provided to control one of the following peripherals: MOH source, night
bell, or page amplifier mute control.
An optional KSTU2 PCB provides an alternate background music source interface. The music
plays through Toshiba telephone speakers, as opposed to the external page speakers.
The optional TSIU PCB provides two RS-232 interface ports to connect two of three options: a
DKAdmin PC (or external modem for remote maintenance); or VM SMDI; or an SMDR port to
connect a call accounting device or printer. An Expansion Unit RS-232 interface PCB is required
if all three features are needed.
10
Unit Weight
8.4 lbs.
(3.8 kg)
1 lb. empty
(0.45 kg)
4.3 lbs. full
(2.4 kg)
Height Width
18.0 inches 12.2 inches
(457 mm) (310 mm)
18.0 inches 7.8 inches
(457 mm) (198 mm)
Strata DK General Description
Depth
3.4 inches
(86 mm)
3.4 inches
(86 mm)
5/99