Personal Computer Interface (Rpci-Di) - Toshiba Strata DK14 General Description Manual

Features
Station Features

Personal Computer Interface (RPCI-DI)

An optional PC interface unit that replaces the normal digital telephone base and provides the
telephone with simultaneous computer-telephone interface and voice/data features as described in
"Integrated PC Interface (RPCI-DI)"
Pooled Line Buttons
A group of CO lines can appear under one button on digital and electronic telephones. The system
can support up to 16 line groups. A station can have up to four buttons for the same group for
handling calls in the same group. Pooled and single appearing line buttons are designed for use
with loop and ground start lines, not Tie, DID, DNIS, or ANI lines.
Private CO Lines
The system can be programmed to allow certain "private" CO lines to appear only on one digital or
electronic telephone and is accessible only by that station.
Push-button Dialing
All Toshiba telephones are equipped with push-button dial pads.
Release Button
Users can complete a transfer or disconnect from a call and become idle just by pressing an
optional
not required. This feature is useful for headset-equipped stations.
Release/Answer Button
5HOHDVH DQG $QV
The
transfer or disconnect the active call and automatically answer a new incoming call. This is useful
for DSS console's telephones or stations that must process many incoming calls.
Remote Retrieval of Held/Parked Calls
Calls placed on hold or parked by a station can be picked up selectively by another station by
pressing a feature button or dialing an access code.
Repeat Last Number Dialed
The last number dialed by a digital or electronic telephone is stored in system memory, and may be
redialed automatically by accessing a CO line and pressing the
code.
Ringing Line Preference
A digital or electronic telephone user with this programmable-by-station feature can answer an
incoming CO, DID, or Tie line call ringing at their station just by lifting the handset or pressing the
6SNU
button, without having to press the button associated with the line.
Saved Number Redial
After dialing a telephone number, a digital telephone user can "save" the number by pressing an
optional feature button. The system will automatically redial the saved number when the user
accesses a [DN] or CO line and presses the button again.
98
5HOHDVH
button on their digital telephones; going on-hook or pressing the hookswitch is
button enables a station user that is talking on a call to release and
on Page 53.
5HGLDO
button or dialing an access
Strata DK General Description 5/99