Correcting a Postage Amount
Sequence of Settings
The procedure below outlines steps to correct the amount on mail that has already
been processed.
3
The sequence is identical to
Postage must be set to the desired additional amount, instead of
•
Print the new postage on the back or bottom of the front of the envelope.
•
How to Correct Postage Amount (Settings)
How to Correct
Postage Amount
(Settings)
40
Re-dating Mail
Make sure you have already completed the preparation steps
Preparing and Starting your Work Session
mentioned in
Required settings:
1
Make sure you are on the home screen of the [Standard ]
type of imprint . The home screen indicates weight, postage
and currently selected rate as illustrated below.
2
Check or change the type of imprint .
Press
screen:
The type of imprint is indicated on line 2 of the screen.
To select an option in the screen:
Highlight the option using the arrow keys
Then press
To change the type of stamp , select the
[OK] and then select [Standard ] in the
and press [OK] .
(p.33 ), except for the following:
and type
1
to access the
to validate your selection.
.
0
p.27 .
Customize stamp
and
Type
line, press
Type of stamp
screen