System Time-Outs; How To Change The 'Sleep Time-Out' (User) - Hasler im-280 User Manual

System Time-outs

9.5

System Time-outs

As user or as supervisor, you can change the following system time-outs:
'Sleep time-out': period of inactivity after which the system automatically turns to
•
'Sleep mode'.
'Soft off time-out': period of inactivity after which the system automatically turns to
•
'Soft off mode'.
These modes are described in section

How to Change the 'Sleep time-out' (User)

How to Change
the 'Sleep time-
out' (User)
Power Management
To change the 'sleep time-out':
1
As a user:
Press
> Job settings > Time-out settings > Sleep time-out
Sleep time-out
The
2
Enter the new value of the 'sleep time-out'.
Use the key [C ] to clear the old setting and then enter a new
value.
3
Press [OK] to validate.
Timeout settings
The
p.20 .
and type 2.3.1 or select the path:
screen is displayed.
screen is displayed.
9
127