Ean 13; Ean 8 - Psion Teklogix Schnellstart- Anleitung 7525 User Manual

6.20.1.5 EAN 13

Enabled
Set this parameter to on to enable "EAN 13".
Prefix/Suffix
Prefix Char
This character, if non-zero, is added before a successfully decoded bar code. Press
the key you want to insert in the dialog box attached to this parameter. The
ASCII/Unicode key value of the keypress is displayed.
Suffix Char
This character, if non-zero, is added after a successfully decoded bar code. Press the
key you want to insert in the dialog box attached to this parameter. The
ASCII/Unicode key value of the keypress is displayed.
Strip Leading
This parameter determines the number of characters that will be removed from the
beginning of the bar code before the prefix character is added.
Note: The appended character is treated as any other keyboard character.
For example, if <BKSP> is pressed, the usual action for that key
is performed.
Strip Trailing
The value entered in this parameter determines the number of characters that will be
removed from the end of the bar code before the suffix character is added.

6.20.1.6 EAN 8

Enabled
Set this parameter to on to enable "EAN 8".
EAN-8 Zero Extend
When this parameter is enabled, five leading zeros are added to decoded EAN-8
symbols, making them compatible in format to EAN-13 symbols. Disabling this
parameter returns EAN-8 symbols to their normal format.
Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
Chapter 6: Settings
EAN 13
119