Upc A Settings; Upc E Settings - Psion Teklogix IKON RUGGED 7505-BTSDCMHC25 User Manual

Chapter 5: Configuration
Decoded (ISCP)

UPC A Settings

Convert To EAN 13
If this parameter is enabled, an EAN 8 bar code is converted to EAN 13.
Prefix/Suffix
Refer to "Prefix/Suffix" on page 171.
5.14.3.7

UPC A Settings

Enabled
Set this parameter to on to enable "UPC A" bar code scanning recognition.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded bar
code data.
Convert To EAN 13
If this parameter is enabled, a UPC A bar code is converted to EAN 13.
Prefix/Suffix
Refer to"Prefix/Suffix" on page 171.
5.14.3.8

UPC E Settings

Enabled
Set this parameter to on to enable "UPC E".
Enable UPC-E1
Set this parameter to on to allow "UPC-E1" (zero suppressed) bar code scans.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded bar
code data.
186 Ikôn Rugged PDA (Windows CE 5.0) User Manual