Ean 13 Settings; Ean 8 - Psion Teklogix IKON RUGGED 7505-BTSDCMHC25 User Manual

Check Digit Verification
The available options for this parameter are Disabled or French CIP. This parameter uses
the specified algorithm of the option you've chosen to ensure the integrity of the symbol data
before transmitting. If the data does not contain that algorithm, the data is not transmitted.
Note: French CIP (French pharmaceutical) is only used with bar codes containing
7 characters.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Field Size/Chars
Refer to "Field Size/Chars" on page 170 for details.
5.14.3.5

EAN 13 Settings

Enabled
Set this parameter to on to enable "EAN 13".
ISBN Conversion
When this parameter (International Standard Book Number) is enabled, the first 3 characters
('978') are ignored and the checksum (0.9, 'X') is calculated on the remaining characters.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Prefix/Suffix
Refer to "Prefix/Suffix" on page 171.
5.14.3.6

EAN 8

Enabled
Set this parameter to on to enable "EAN 8".
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Ikôn Rugged PDA (Windows CE 5.0) User Manual
Chapter 5: Configuration
Decoded (ISCP)

EAN 13 Settings

185