Selecting A Camera; C.3.2 Selecting A Camera; Setting The Active Preset - Psion Teklogix IKON RUGGED PDA 7505-BTMC75 User Manual

The following screen is displayed:
Figure C.1 Imaging Tab
This window lists all the presets, both predefined and custom. Presets are identified
as follows:
• Predefined presets are marked as read-only.
• Custom presets are marked as read and write.
• One preset – either predefined or custom – is marked as active.
C.3.2

Selecting A Camera

If your Ikôn has more than one built-in camera, one camera must be selected for configura-
tion. To select a camera:
• Tap on the Camera Presets dropdown menu to view the camera options.
• Choose a camera – either Front Imager, the imager located at the top of the unit, or
Bottom Colour Camera, the camera located at back of the Ikôn.
Important: Currently, only the 'Front Imager' can be used to read bar codes. The
C.3.3

Setting The Active Preset

An active preset has an A to the right; in Figure C.1 on page C-5, the active preset is Low
light near. To set an active preset:
• Highlight the preset, and tap on the Activate button.
'Bottom Colour Camera' is limited to taking photos.
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual
Appendix C: Teklogix Imagers Applet
Selecting A Camera
C-5