Instruction Protocol, Checklist - h/p/cosmos 150/50 Operating And Service Manual

15.2 Instruction protocol, checklist

Once the installation of the running machine has been completed, the h/p/cosmos employee or h/p/cosmos partner starts
commissioning of the device and instruction of the user. It is important to include all people in the instruction and
commissioning who are going to work with the running machine. After the instruction is completed, the instruction protocol is
to be signed by the h/p/cosmos technician and all trained persons. Signed instruction protocol, signed delivery note and the
registration form are to be sent to h/p/cosmos.
Instruction on general operation
1.
2.
3.
© 2013 h/p/cosmos sports & medical gmbh
Hand over operating manual.
Inform about operating and service manual (always keep one within
reach of all users).
delivery folder) close to the treadmill.
Children are not allowed near or on the treadmill. For "higher-risk
applications" or where a fall would lead to unacceptable risks, a
safety arch with chest belt system and fall stop prevention has to
be used.
In particular point out the necessary safety zone.
Keep a safety zone of at least 2 m in length and the treadmills width
behind the running machine and 1 x 1 m in front of the running
machine. In case of reverse belt rotation, the frontal safety zone should
be same size as the rear.
See chapter 5.1 entitled "Operation, General".
file: n:\article\cos14310m5-v1_07hpc-en\20130207_cos14310m5-v1.07hpc-en_h-p-cosmos_treadmill_manual.doc
author: fh email@h-p-cosmos.com
Refer to safety notes, warnings and
precautions in this manual. Place the print-out
of the safety instructions (DIN A4 form in the
created 07.02.2013 printed 04.03.2013 page: 185 of 197
appendix

accomplished

accomplished