Switch Off Procedure; Switch Off Procedure Model Range 150/50 Up To 190/65 - h/p/cosmos 150/50 Operating And Service Manual

[02]
[03]
[04]
[05]

5.3 Switch off procedure

5.3.1

Switch off procedure model range 150/50 up to 190/65

no. Illustration
[01]
© 2013 h/p/cosmos sports & medical gmbh
file: n:\article\cos14310m5-v1_07hpc-en\20130207_cos14310m5-v1.07hpc-en_h-p-cosmos_treadmill_manual.doc
author: fh email@h-p-cosmos.com
Release all emergency stop buttons of the treadmill
ergometer.
In case of any problems / malfunction:
Make sure that all expulsion fuses in the external
switching cabinet are switched on. Opening of the
device must only be performed by authorized
technicians.
Switch on the running machine by using the main
switch at the right side of the external UserTerminal
(control unit). The main switch has to be turned 90°
clockwise as shown in the picture.
The main switch can be secured against
unauthorized access with a padlock.
After a delay time (green light is blinking) of 1 minute
the green light stops blinking and stays illuminated.
Now the running machine can be powered on by
pressing the "ON" push button.
For models built before the year 2012 the green lamp
extinguishes after the switch on delay of 1 minute.
Description
Switch off the running machine by pressing the black
or red "OFF" push button at the front of the device.
The indicator light within the key extinguishes. For
some models the location of the ON-/OFF-key may
also be at the UserTerminal. Devices for sports and
fitness manufactured before 12/2007 can be switched
off directly with the expulsion fuse at the
FrontTerminal (frontal section below the hood).
created 07.02.2013 printed 04.03.2013
operation
page: 28 of 197