Retrofitting Emergency Stop Buttons; Safety Multiple Socket - h/p/cosmos 150/50 Operating And Service Manual

12.18 Retrofitting emergency stop buttons

[cos100548] incl. 10 m cable, no spiral cable
[cos15933] incl. 5 m spiral cord cable.
[cos15021] extern incl. 2 m spiral cord, mount 60mm (incl. clamp fixation)
[ ]
cos15294L10m incl. 10 m cable, no spiral cable, please stipulate the serial number of the device
[ ]
cos15294L15m incl.15 m cable, no spiral cable, please stipulate the serial number of the device

12.19 Safety multiple socket

safety multiple socket [cos100157]
Use a dedicated line only. Due to the very high load of treadmills, it is never allowed to connect
N
more than one treadmill or other consumer devices with high load to the multiple safety socket.
The power consumption of the consumer devices additionally connected to the treadmill must
N
be lower than 300 W in total. Furthermore the additional devices must be connected to the
treadmill via a multiple safety socket.
When connecting treadmills to the multiple safety socket, there are no performance-limitations
N
at low-performance applications (walking, slow running). For high-performance applications
(fast running, sprints, etc.), the use of multiple safety sockets may result in performance
limitations.
For high performance applications, a 3-phase powered treadmill is recommended.
N
© 2013 h/p/cosmos sports & medical gmbh
Emergency stop extern 2 m mount 60 mm (incl. clamp fixation)
external emergency stop for handrail fixation, only for handrails with rail diameter d = 60mm
plug: 3 pin XLR male
To connect this external emergency stop with the treadmill, ensure that your treadmill has a
rear panel terminal for external emergency stops. If there is no socket for external
emergency stops, order the special rear panel terminal for additional keyboard [cos10109]
Emergency stop extern 10 or 15 m (without fixation)
external emergency stop without fixation on the treadmill,
plug: 3-pin XLR plug male
To connect the external emergency stop with the treadmill, ensure that your treadmill has a
rear panel terminal for external emergency stops. If there is no socket for external
emergency stops, order the special rear panel terminal for additional keyboard [cos10109]
file: n:\article\cos14310m5-v1_07hpc-en\20130207_cos14310m5-v1.07hpc-en_h-p-cosmos_treadmill_manual.doc
author: fh email@h-p-cosmos.com
Emergency stop buttons with magnet holder
external emergency stop button with magnetic
holder for easy fixation on h/p/cosmos running
machines, for example on handrail,
plug: 3 pin XLR male
The stable safety multiple socket can be used for the safe
connection of a medical h/p/cosmos treadmill with peripheral
devices such as PCs, printer or monitors.
It meets all requirements of EN60601-1 for multiple sockets
for creating connections to a medical electrical system within
the patients environment, i.e. < leakage current of 0.5 mA for
the complete system.
created 07.02.2013 printed 04.03.2013
accessories and options
page: 172 of 197