Accessories And Options; Arm Support - h/p/cosmos 150/50 Operating And Service Manual

12 Accessories and options

The following chapters describe the accessories and options available at h/p/cosmos.
Only connect and/or use accessories, software and host equipment if it is approved as compatible by
all manufacturers. Non-compliance with this clause can lead to serious injury or death. Furthermore,
manufacturer warranty and liability expires.
Pay attention to further safety regulations and operation instructions in the appendix of this instruction
manual. Pay special attention to all instructions for operation, maintenance and service in all accessory
and/or software manuals.
Chest harnesses, patient vests, waist belts with leash and cuffs, leg cuffs and forearm overlays ("arm
rests") are not designed for direct skin or mucous membrane contact. Wear appropriate clothing.

12.1 Arm support

The h/p/cosmos arm supports (patent no.: DE 199 16 508 A1) are applicable especially in the field of rehabilitation and
walking therapy, as well as for the safety of seniors and insecure persons. Therapies can start earlier and the therapist
is supported efficiently in his work.
The arm supports with additional keyboard and additional stop button offers a wide range of applications, e.g. exercising
in gentle way for patients/people with over-weight, orthopaedic problems or cardiovascular diseases.
h/p/cosmos arm support [cos00098060044] for handrails with 10° angle
h/p/cosmos arm support [cos12013] for handrails with 0° angle (for example long handrails with 2 pillars
available for h/p/cosmos running machines model series
h/p/cosmos mercury
N
h/p/cosmos quasar
N
h/p/cosmos pulsar
N
Reproducibility of adjustments
The arm supports can be precisely adjusted to the needs and physical demands of the patient. Three joints with scale on
each side offer individual adjustments.
To obtain reproducibility, the individually optimal adjustments have to be determined (see scaling at the locking elements)
for each subject and noted appropriately (e.g. in a patient file). We have deliberately refrained from offering standard
settings for particular heights because the adjustment can widely differ according to the posture and the individual situation
of the testing person.
The torsional elements have a scaling at any joint, which is afferent when turned in the direction of the running surface.
The adjustments of the height and width occur gradually because the interlocking of the joints works in 6° steps. In the
illustration above, which can be copied, e.g. for patient files, you can fill in the scaling data for the individual adjustments of
a patient.
© 2013 h/p/cosmos sports & medical gmbh
®
®
with long and standard handrails
®
file: n:\article\cos14310m5-v1_07hpc-en\20130207_cos14310m5-v1.07hpc-en_h-p-cosmos_treadmill_manual.doc
author: fh email@h-p-cosmos.com
accessories and options
created 07.02.2013 printed 04.03.2013 page: 158 of 197