The Keyboard; The Display - h/p/cosmos 150/50 Operating And Service Manual

5.5.1

The keyboard

basic functions
alteration of elevation
program steps
basic functions
selection of mode (manual, profile, cardio, test)
alteration of parameters (speed, acceleration / deceleration)
selection of options, program parameters
The keys may also have special functions within the different operation modes (see the following chapters).
5.5.2

The display

The display consists of six four-digit LCD displays which show speed, time, index (MET, energy consumption, wattage,
alternating), distance, elevation (inclination) and heart rate. Error codes and service information can also be displayed. Next
to the LCD displays you will find light-emitting diodes (LED) which indicate the selected operation mode or measuring unit
(LED )
Flashing displays indicate:
select option (LED )
N
alterable parameter (LCD)
N
interference / error
N
© 2013 h/p/cosmos sports & medical gmbh
The red coloured STOP button next to the START button on the UserTerminal is NOT an
emergency button which is disconnecting from the mains power supply. It is not an
emergency control based on IEC 60601-1:2005. In case of emergency press the big
emergency stop push button (mushroom style button).
file: n:\article\cos14310m5-v1_07hpc-en\20130207_cos14310m5-v1.07hpc-en_h-p-cosmos_treadmill_manual.doc
author: fh
basic functions
confirmation of mode (manual, profile, cardio, test)
confirmation of parameters (speed, time, pulse,
etc.)
confirmation of options (measuring unit)
start (of selected mode)
email@h-p-cosmos.com created 07.02.2013
operation
basic functions
STOP
discontinuance of operation
printed 04.03.2013 page: 33 of 197