Switch Off Procedure Model Range 200/75 Up To 450/300 - h/p/cosmos 150/50 Operating And Service Manual

5.3.2

Switch off procedure model range 200/75 up to 450/300

no. Illustration
[01]
[02]
The ON-/OFF intervals must not be shorter than 1-2 minutes (for models with 3-phase
N
connection: 2-3 minutes). This may otherwise lead to interference and/or failure of the backup
and/or data loss and/or data corruption.
Models for medical application with the isolation transformer have an inrush current limiter
N
(surge guard). Too short ON/OFF intervals will lead to a deactivation of the inrush current limiter
and result in an overload of the circuit fuse.
If the device is used daily, we recommend switching it on in the morning and leave it in stand-by
N
mode during the day.
Press the emergency stop only in case of danger.
N
The emergency stop is not to be used as a normal stop key.
N
© 2013 h/p/cosmos sports & medical gmbh
file: n:\article\cos14310m5-v1_07hpc-en\20130207_cos14310m5-v1.07hpc-en_h-p-cosmos_treadmill_manual.doc
author: fh email@h-p-cosmos.com
Description
To switch into "stand by" mode press the black "OFF"
push button.
Then switch off the running machine turn the red main
switch at the right side of the external control unit.
The main switch has to be turned 90° counter
clockwise. The main switch can be secured against
unauthorized access with a padlock.
created 07.02.2013 printed 04.03.2013
operation
page: 29 of 197