Intermec EasyCoder C4 Reference Manual page 56

Chapter 7—Commands
D – Density, cont.
Recommended density settings are identifi ed in the following tables.
Further adjustments might be necessary depending on print speed, bar
code density, orientation, and ambient temperature/humidity conditions.
Direct Thermal Printing
Label/Tag Type
Duratherm II
Duratherm II Tag
Duratherm Lightning
Duratherm IR
Thermal Top
Thermal Eco
Thermal Top Board
Thermal Eco Board
Thermal IR
Thermal Top High Speed
50 Intermec EasyCoder ESim v4.00—Programmer's Reference Manual
Rec. Density Max. Speed
at Speed S = 2
D10 S3
D9 S1
D9 S3
D7 S3
D8 S3
D8 S3
D11 S2
D7 S2
D12 S3
D6 S3