Download Variables - Intermec EasyCoder C4 Reference Manual

Chapter 7—Commands
? – Download Variables
This command is used to signal to the printer that the data
Description
following are variable or counter values.
Syntax
?
This command is used by the host system to send data
Remarks
representing variables and/or counters to the printer after a stored
for containing variables and/or counters has been retrieved. The
amount of data following the question mark line must match
exactly the total number and order of variables and/or counters
for that specifi c form.
Note: If the ? command is omitted, no variables or counter values
will be printed.
Example
FR"TEST7"↵
?↵
12345↵
abcde↵
ABCDE↵
99999↵
P1↵
114 Intermec EasyCoder ESim v4.00—Programmer's Reference Manual
:Retrieves the form "TEST7"
:Variables follow
:Variable 00 entered
:Variable 01 entered
:Variable 02 entered
:Variable 03 entered
:Prints one label