N Clear Image Buffer - Intermec EasyCoder C4 Reference Manual

N – Clear Image Buff er
This command is used to clear the image buffer before building
Description
a new image. It also clears any error list that not yet has been
presented.
Syntax
N
Remarks The N command is essential when printing labels in the Direct
Mode. It is not necessary to use an N command before printing
a form. An N command must not be used inside a form in the
Form Edit Mode.
Example
N↵
Intermec EasyCoder ESim v4.00—Programmer's Reference Manual
Chapter 7—Commands
:Clears image buffer
83