Maxicode - Intermec EasyCoder C4 Reference Manual

b – MaxiCode
The following MaxiCode specifi c options should append the
Description
general part of the two-dimensional code command
command, general
Syntax
["CL,CO,PC,LPM"]
Parameters CL
CO
PC
LPM
Example N↵
b100,100,M,"300,400,93065,1692,This is→
→MaxiCode"↵
P1↵
Intermec EasyCoder ESim v4.00—Programmer's Reference Manual
part). Only mode 2 and 3 are supported.
Class Code (3 digit number).
Country Code (3 digit number).
Postal Code (type of input decides mode 2 or 3):
Mode 2: U.S.A. (5 digits, 4 digits). Note the separating comma sign!
Mode 3: International (6 alphanumeric characters).
Low Priority Message (up to 84 alphanumeric characters).
Chapter 7—Commands
(see b
41