Error Types - Intermec EasyCoder C4 Reference Manual

Appendix A — Error-Handling

Error Types

Classifi ed types of error & status codes for the Error Replies table later in
this appendix.
Type Feature
A Minor Error
of command
sequences and
similar.
B Print Stopping
Error.
C Paper End
Stopping
Error.
D Error of
printing
functionality
and status.
E Status
changes.
F Unrecoverable
Error.
G Dump mode.
142 Intermec EasyCoder ESim v4.00—Programmer's Reference Manual
Generates
At Error reporting (cmd
US): Sets error on print
command and sets Orange
LED or Red LED.
At no Error reporting (cmd
UN): Green LED, at print
command
Sets Orange LED or red
LED.
Sets red LED, at print.
Sets red LED direct,
sometimes blinking.
No LED change.
Sets red LED direct.
Green LED in dump mode.
Recovered by
At Error reporting (cmd US):
FEED key or command Reset
^@. See Also command USA.
At no Error reporting (cmd
UN): No recover necessary,
already done.
Feed Key or command Reset
^@.See also command USB.
Load new media and press
FEED key or command Reset
^@.
Manual or automatic
(temperature lowered) measure
or command Reset ^@.
No recover necessary/Delete
Label from LTS. See also
command USE.
Power Off/Power On or
command Reset ^@.
Feed Key or command Reset
^@.