B Standard Bar Codes; B Print Standard Bar Codes - Intermec EasyCoder C4 Reference Manual

Chapter 7—Commands
B – Standard Bar Codes
This command is used to print standard bar codes.
Description
Syntax
Bp
1
Parameters p
1
p
2
p
3
p
4
p
5
p
6
p
7
p
8
"DATA"
36 Intermec EasyCoder ESim v4.00—Programmer's Reference Manual
,p ,p ,p ,p ,p ,p
2 3 4 5 6
Horizontal start position (X) in dots.
Vertical start position (Y) in dots.
0 No rotation.
1 90 degrees rotation clockwise.
2 180 degrees rotation clockwise.
3 270 degrees rotation clockwise.
Bar code select. See Bar Code Type table below.
Narrow bar width in dots. See Bar Code Type table below.
Bar Code Type
Code 39 std. or extended
Code 39 with check digit
Code 93
Code 128 UCC case code
Code 128 A, B, C
Codabar
EAN8
EAN8 2 digit add-on
EAN8 5 digit add-on
EAN13
EAN 13 2 digit add-on
EAN13 5 digit add-on
Interleaved 2 of 5
Interleaved 2 of 5 with check digit
Interleaved 2 of 5 w human readable check digit
Postnet 5, 6, 8 & 11 digit
UCC/EAN 128
UPC A
UPC A 2 digit add-on
UPC A 5 digit add-on
UPC E
UPC E 2 digit add-on
UPC E 5 digit add-on
UPC Interleaved 2 of 5
Wide bar width in dots (2 -30).
Barcode height in dots.
B Human readables ON.
N Human readables OFF.
Represents a fi xed data fi eld.
,p ,"DATA"
7 8
"p4" "p5"
3 1-10
3C 1-10
9 1-10
0 1-10
1 1-10
K 1-10
E80 2-4
E82 2-4
E85 2-4
E30 2-4
32 2-4
E35 2-4
2 1-10
2C 1-10
2D 1-10
P n.a.
1E 1-10
UA0 2-4
UA2 2-4
UA5 2-4
UE0 2-4
UE2 2-4
UE5 2-4
2U 1-10