Intermec EasyCoder C4 Reference Manual page 38

Chapter 7—Commands
↵
Example
N↵
A50,0,0,1,1,1,N,"Example 1"↵
A50,50,0,2,1,1,N,"Example 2"↵
A50,100,0,3,1,1,N,"Example 3"↵
A50,150,0,4,1,1,N,"Example 4"↵
A50,200,0,5,1,1,N,"EXAMPLE 5"↵
A50,300,0,3,2,2,R,"Example 6"↵
P1↵
Note: Font size 5 only supports uppercase characters, see example
5 in the label above.
The "DATA" fi eld can be replaced by or combined with the
Remarks
commands below:
Variable:
Vnn
Consecutive Number Counter:
Cn
Cn±x
Example:
When labels with consecutive numbers are printed next to each
other across the media, it is done by using a single counter in a
single form.
The command Cn±x in our example will be used twice and
32 Intermec EasyCoder ESim v4.00—Programmer's Reference Manual
Prints the contents of variable "nn" at this position,
where nn is a 2 digit number from 00-99.
Prints the contents of counter "n" at this position,
where n is a 1 digit number from 0- 9.
Prints the contents of counter "n" at this position while
setting the counter's start value to "x". n and x are 1
digit numbers from 0-9
Enter + to increment or - to decrement.