P Print - Intermec EasyCoder C4 Reference Manual

P – Print
This command is used to print the contents of the image buffer.
Description
Syntax
Pp
1
Parameters p
1
p
2
Important!
Remarks
The P command cannot be used inside a stored form sequence.
For automatic printing of stored forms, use the
Examples
P↵
P1↵
P2,1↵
P5,2↵
The principles for how counters are printed is illustrated by this
example, where the print command is P2,2:
Counter: 1
Counter: 1
Counter: 2
Counter: 2
Intermec EasyCoder ESim v4.00—Programmer's Reference Manual
[,p ]
2
Numbers of label sets (1-65535).
Number of copies of each label (1-65535). Used in combination with counters
to print multiple copies of the same label.
Chapter 7—Commands
:Prints two label sets of one label each
:Prints five label sets of two labels each
Label No. 1
Label No. 2
Label No. 3
Label No. 4
PA command.
:Prints one label set
:Prints one label set
87