Omron SYSDRIVE RX Series User Manual page 65

Direct Code Specification and Selection
• The codes can be specified or selected by directly entering each digit of the codes or data, as well
as by scrolling the codes of the monitor, basic function, and extended function modes.
• Below is an example where monitor mode code "d001" is changed to extended function code
"A029".
1. Display the monitor mode code.
("d001" is displayed.)
dk0k0k1
Press
*2 *3
2. Change the extended function mode.
dk0k0k1
Press
("A001" is displayed.)
ak0k0k1
*2
(Continued to the next page)
and simultaneously.
*1
(2 times).
*3
Press .
("A" is entered.)
3-6 Parameter Transition
• "d" of the 4th digit on the left starts to blink.
• "A" blinks.
• Press the Enter key to fix the blinking digit.
3
3-16