Omron SYSDRIVE RX Series User Manual page 64

3-6 Parameter Transition
Display System and Key Sequence of Extended Function Mode U
The extended function mode U is the parameter to optionally register (or automatically record) other
extended function codes, and differs in operation from other extended function modes.
Operation and sequence of
code display
(Monitor/Function modes)
*1. The setting displayed varies depending on the parameter.
3
*2. To change the data, be sure to press the Enter key.
pk-k-k-
uk-k-k-
dk0k0k1
Pressing the Enter key
does not return.
3-15
Operation and sequence of Operation and sequence of code display
code display
(Extended function mode U)
Extended
function
mode U
uk0k0k1
or
uk0k1k2
Press the Enter key to enter
the selected code
in parameter "U".
Displaying another mode
from extended function mode U
ak0k0k1
Extended
function
mode A
ak1k5k3
bk0k0k1
Extended
function
mode B
Press the Enter key to
bk1k3k2
reflect the set value in each
parameter.
Note that no data can be
ck0k0k1
fixed in parameter "U".
Extended
function
ck1k5k9
mode C
hk0k0k1
Extended
function
mode H
hk0k7k3
pk0k0k1
Extended
function
mode P
pk1k3k1
nko
(Factory default)
dk0k0k1
Monitor
mode
dk1k0k4
fk0k0k1
Function
mode
fk0k0k4
Operation and sequence
of monitor/data display
(Monitor/Function/Extended
function modes)
(Data display)
*1 *2
3
2
or
1